Naugahyde Top Covers

At Fiber Labs we utilize Naugahyde Top Covers on a majority of our orthotics.

Because Naugahyde is so easy to keep clean, the health care industry uses Naugahyde in many areas of hospitals, nursing homes, doctor's offices and anywhere sanitation is important, this includes orthotics.

Each pair of orthotics shipped from Fiber comes with a care instruction sheet. That sheet provides information to you patients on cleaning and care of their orthotics.

Cleaning Naugahyde®

Cleaning is a breeze with Naugahyde brand fabric . While staining and soiling exposures are common to upholstery fabrics, most stain and soiling may be removed by using the simple cleaning methods that follow:

For Light soiling:
1. A solution of 10% household liquid dish soap with warm water applied with a soft damp cloth will remove most soiling.

2. If necessary, a solution of liquid cleanser and water applied with a soft bristle brush. Wipe away the residue with a water-dampened cloth.

For Heavier soiling not solved by above method:
1. Dampen a soft white cloth with lighter fluid (naphtha) and rub gently. Rinse with a water-dampened cloth.

NOTE: Use extreme caution with this method. Complete only in a well-ventilated area and away from any open flame.

NOTE: You should try this method on an inconspicuous spot before using it on the original stain/soiling.

For the most difficult stains not removed by the above methods:
1. Dampen a soft white cloth with a solution of household bleach (sodium hypochlorite); 10% bleach, 90% water.

2. Rub gently.

3. Rinse with a water-dampened cloth to remove bleach concentration.

4. If necessary, allow a 1:10 diluted bleach solution to puddle on the affected area or apply with a soaked cloth for approximately 30 minutes. Rinse with a water-dampened cloth to remove any remaining bleach concentration.

NOTE: You should try this method on an inconspicuous spot before using it on the original stain/soiling.